FAQ's

The DPW exhaust cutouts will only start to work properly after they have been registered.The DPW exhaust cutouts will only start to work properly after they have been registered.

There's a two sizes available, 2,5" inches, and 3"inches cutouts

As it is a device that is installed in the exhaust, it is exposed to the effects of the weather and temperature changes, so requires care at times, such as checking connectors, if need clean spraying some electrical cleaner on the actuator connector, disconnecting from the battery if you are going to use a jump starter, charger, etc., never wash the actuator with a high-pressure washer, do not immerse the cutouts, they are water resistant and not waterproof.

If you need any parts for the DPW Exhaust Cutouts we have all the parts here, just talk to our customer service team via chat or email.

You have a 6-month warranty, but all cases are carefully analyzed to serve you better, we want you to be satisfied with our product.

A: SPEED INFINITY ® is a throttle response controller with an APP, capable of processing and modifying the signals thrown from the throttle pedal to the ECU. The purpose is to achieve an enhanced and safer driving experience. It improves the response of the engine, limit the acceleration and lock the pedal on the anti-theft mode. Quick and Safe Installation with 100% Plug & Play allowing to keep all stock features when uninstalled, will not leave residual codes, and can be reinstalled countless times in vehicles with similar settings.

A: No, it will not leave residual codes, and can be reinstalled countless times in vehicles with similar settings.

A: You can customize SPEED INFINITY® to interact with the vehicle’s factory modes and improve its stock settings, but using SPEED INFINITY® by itself (leaving the vehicle’s factory settings in stock mode) will achieve better results than combining both or using the factory alone. SPEED takes the hesitation out of the factory setup…a smoother transition in and out of factory settings.

A: No, SPEED INFINITY® has the ECO mode for gentle acceleration, which can consequently decrease fuel consumption. Fuel consumption is related to the driver’s driving style.

A: SPEED INFINITY® intent is not to increase power but to anticipate the vehicle’s power and torque entry.

The SPEED INFINITY® features a driving mode that limits the vehicle's acceleration. Even when you press hard on the accelerator, the RPM does not rise, allowing the valet to gently drive the vehicle into your parking space.

A: SPEED INFINITY® offers the option to fully block the accelerator response, only allowing it to restart with the unlock command from the APP.

A: Unlocking the pedal is only achieved through the app. If you are unable to recharge your cell phone, you must uninstall SPEED INFINITY® so your vehicle can regain acceleration.

It is not advisable to step on the throttle pedal, as the change in acceleration can affect the vehicle's behavior.

There is no possibility. The driver may become accustomed to the driving experience of SPEED INFINITY®. In this case, it is recommended to turn off SPEED INFINITY® and note the difference with and without the product.

A: SPEED INFINITY® can operate in another vehicle with the same type of connector,you just need to contact support to have the reset on your app enabled,After the reset, register the new vehicle in the app to download the software for the car. If the connector is different, purchase a new harness with the same connector as the new vehicle.if you have any doubts about the right connector for your vehicle, contact the support.

A: SPEED INFINITY® has 6 driving modes which are: eco, sport, performance, track, valet and stock. Each driving mode can be customized using sensitivity adjustments made through the SPEED APP, only.

A: No, it is a 100% plug and play product, it can be installed and uninstalled easily without leaving any residual codes.

Yes, If you have already purchased and installed a DPW exhaust cutouts, you can connect to the SPEED INFINITY® app and choose the acceleration range you want to open and close the cutouts.